Frigidaire Gallery Series GLEFZ384HC Use & Care Manual page 11

Setting Oven Controls (cont'd)
To Set the Minute Timer:
1. Press .
2. Press the to increase the time in one minute
increments. Press and hold the
time in 10 minute increments. The timer can be set for
any amount of time from 1 minute to 11 hours and 59
minutes.
Note: If the pad is pressed first, the timer will
advance to 11 hours and 59 minutes.
3. The display shows the timer countdown in minutes until
1 minute remains. Then the display will countdown in
seconds.
4. When the set time has run out, the timer will beep 3
times and will continue to beep 3 times every 60
seconds until is pressed.
Notes: The indicator light located above the
glow while the minute timer is active. The minute timer does
not start or stop cooking. It serves as an extra timer in the
kitchen that will beep when the set time has run out. The
minute timer can be used alone or during any of the other
oven functions. When the minute timer is in use with any
other function, the minute timer will be shown in the display.
To view other functions, press the pad for that function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press
and hold the or
To Cancel the Minute Timer before the set time has
run out: Press .
Note: To turn the time of day display OFF or ON in the
display press and hold for 15 seconds (the control
will beep once) and then release. This feature does not
remove the set time of day from the memory of the
control. When the display is turned OFF the time of day
will re-appear for a few seconds any time the
is touched.
To Set or Change the Temperature for Baking
The oven can be programmed to bake at any temperature
from 170°F to 550°F (77°C to 287°C).
To Set the Controls for Baking:
1. Press . "— — —" appears in the display.
2. Within 5 seconds, press the
to increase the
pad will
to increase or decrease the time.
or . The display
will show "350°F (177°C)." By pressing and holding
the or
in 5°F increments (1°C if the control is set to display
Celsius).
3. As soon as the
begin heating to the selected temperature. When the
displayed temperature reaches the desired baking
temperature, the preheat indicator light will turn OFF
and the control will beep 3 times.
4. To cancel baking, press
To Change the Oven Temperature after Baking has
Started:
1. Press
displayed.
2. Press the
set temperature.
To Set Control for Continuous Bake or 12
Hour Energy Saving
The oven control has a built-in 12 Hour Energy Saving
feature that will shut off the oven if the control is left on for
more than 11 hours and 59 minutes. The oven can be
programmed to override this feature for continuous baking.
To set control for continuous baking:
1. Press and hold
heard, " — — hr" will appear in display for continuous
cooking. The current time of day will return to the
display.
2. To cancel the Continuous Bake function, press
and hold for 5 seconds until tone is heard. "12hr" will
appear in display indicating that the control has
returned to the 12 Hour Energy Saving feature.
To Set Control for Oven Lockout
The control can be programmed to lock the oven door and
lockout the oven control pads.
To set Control for Oven Lockout feature:
1. Press
display, the "Door Locked" indicator light will flash and
the motor driven door lock will begin to close
pad
automatically. DO NOT open the oven door while the
indicator light is flashing. Allow about 15 seconds for
the oven door to lock. Once the oven door is locked, the
current time of day will appear in the display.
2. To cancel the Oven Lockout feature, press
hold for 3 seconds. The control will unlock the oven door
and resume normal operation.
Note: If any control pad is pressed while in the Oven
Lockout mode, "Loc" will appear in the display until
the control pad is released.
11
, the temperature can then be adjusted
or pad is released, the oven will
.
and make sure the bake temperature is
or pad to increase or decrease the
down for 5 seconds until tone is
and hold for 3 seconds. "Loc" will appear in
and