Page 1
4. CAREFULLY UNPACK ALL CONTENTS; SOME COMPONENTS MAY HAVE BEEN SHIPPED IN SEPARATE BOXES MOST FIXTURES ARE SHIPPED PARTIALLY ASSEMBLED. SOME UNASSEMBLY MAY BE REQUIRED FOR INSTALLATION. 5. DO NOT LET THE LUMINAIRE HANG FROM THE WIRE CONNECTIONS. OCL Architectural Lighting Phone: 314.863.1895 Fax: 314.863.3278 www.ocl.com...
FIG.8 – REFLECTOR DISASSEMBLY 4. Remove FACE by depressing one of the HINGE PINS, and tilting FACE forward as shown in FIG. 9. HINGE PIN FACE REMOVED FIG.9 – FACE / DOOR DISASSEMBLY OCL Architectural Lighting Phone: 314.863.1895 Fax: 314.863.3278 www.ocl.com Page...
Page 6
10. Close the FACE and apply Pressure towards WALL and tighten SET SCREWS. Restore power to circuit the series is connected to. Test to see that the luminaire turns on after power is restored. b. Contact OCL for any luminaire troubleshooting if a problem occurs. FIG. 17 – INX-O1OA-24-XX-PTD- FIG. 15 - AU1-O1OA-24-XX-PTD- FIG.
This manual is also suitable for:
Newport seriesIntrigue seriesAllure au1-o1oa-24 seriesNewport np1-o1oa-24 seriesIntrigue inx-o1oa-24 series