Advertisement
ALLURE, NEWPORT & INTRIGUE OUTDOOR SCONCE WITH O1OA HANGING SYSTEM
These instructions cover the ALLURE, NEWPORT & INTRIGUE luminaire with the following options:
HANGING
SERIES
SYSTEM
1. ALLURE
(AU1)
O1OA:
2. NEWPORT
OUTDOOR
(NP1)
SCONCE
3. INTRIGUE
(IN1 & IN2)
FIG. 1 - AU1-O1OA-24-XX-PTD-LEDX_XXK-
UNV-DM1-XXX (AS SHOWN)
GENERAL NOTES:
1. PLEASE COMPLETELY READ THE INSTALLATION INSTRUCTIONS BEFORE STARTING INSTALLATION.
2. TURN OFF POWER TO CIRCUIT FIXTURE WHILE IT IS BEING INSTALLED.
3. INSTALL IN ACCORDANCE WITH ALL LOCAL, STATE AND NATIONAL CODES CONSULT WITH A QUALIFIED
ELECTRICIAN FOR PROPER INSTALLATION.
4. CAREFULLY UNPACK ALL CONTENTS; SOME COMPONENTS MAY HAVE BEEN SHIPPED IN SEPARATE BOXES
MOST FIXTURES ARE SHIPPED PARTIALLY ASSEMBLED. SOME UNASSEMBLY MAY BE REQUIRED FOR
INSTALLATION.
5. DO NOT LET THE LUMINAIRE HANG FROM THE WIRE CONNECTIONS.
INSTALLATION INSTRUCTIONS
LIGHT
SIZE
SOURCE
18"
24"
STATIC
36"
WHITE
48"
FIG. 2 – NP1-O1OA-24-XX-PTD-LEDX_XXK-
UNV-DM1-XXX (AS SHOWN)
OCL Architectural Lighting
Phone: 314.863.1895
Fax: 314.863.3278
www.ocl.com
Sensitivity: Internal & Restricted
CONTROL
DM1: 0-10V DIM 1%
FIG. 3 – INX-O1OA-24-XX-PTD-LEDX_XXK-
UNV-DM1-XXX (AS SHOWN)
WIRE LABEL
TABLE
WIRE LABEL
TABLE ON
PAGE 5
Advertisement
Table of Contents
Related Manuals for OCL Allure Series
Summary of Contents for OCL Allure Series
- Page 1 4. CAREFULLY UNPACK ALL CONTENTS; SOME COMPONENTS MAY HAVE BEEN SHIPPED IN SEPARATE BOXES MOST FIXTURES ARE SHIPPED PARTIALLY ASSEMBLED. SOME UNASSEMBLY MAY BE REQUIRED FOR INSTALLATION. 5. DO NOT LET THE LUMINAIRE HANG FROM THE WIRE CONNECTIONS. OCL Architectural Lighting Phone: 314.863.1895 Fax: 314.863.3278 www.ocl.com...
- Page 2 Rev date: 14 APR 2021 ALLURE_NEWPORT_INTRIGUE-O1OA-LED-INSTALLATION_INSTRUCTIONS Table of Contents GENERAL INFORMATION: ............................3 MOUNTING: ................................4 ALLURE/NEWPORT/INTRIGUE MOUNTING: ....................... 4 OCL Architectural Lighting Phone: 314.863.1895 Fax: 314.863.3278 www.ocl.com Page Sensitivity: Internal & Restricted...
- Page 3 ANCHOR SCREWS 4 QTY SEALING WASHER RED BAG 4 QTY INSTALLATION INSTRUCTION ANCHOR BODY 4 QTY FIG.5 - RED BAG AND INSTALLATION FIG.6 – MOUNTING HARDWARE INSTRUCTION MANUAL OCL Architectural Lighting Phone: 314.863.1895 Fax: 314.863.3278 www.ocl.com Page Sensitivity: Internal & Restricted...
- Page 4 FIG.8 – REFLECTOR DISASSEMBLY 4. Remove FACE by depressing one of the HINGE PINS, and tilting FACE forward as shown in FIG. 9. HINGE PIN FACE REMOVED FIG.9 – FACE / DOOR DISASSEMBLY OCL Architectural Lighting Phone: 314.863.1895 Fax: 314.863.3278 www.ocl.com Page...
- Page 5 STATIC OUTDOOR DM1: 0-10V DIM 1% TABLE ON (NP1) 36” WHITE SCONCE LED2 PAGE 5 3. INTRIGUE 48” (IN1 & IN2) FIG. 12 – WIRE LABEL TABLE OCL Architectural Lighting Phone: 314.863.1895 Fax: 314.863.3278 www.ocl.com Page Sensitivity: Internal & Restricted...
- Page 6 10. Close the FACE and apply Pressure towards WALL and tighten SET SCREWS. Restore power to circuit the series is connected to. Test to see that the luminaire turns on after power is restored. b. Contact OCL for any luminaire troubleshooting if a problem occurs. FIG. 17 – INX-O1OA-24-XX-PTD- FIG. 15 - AU1-O1OA-24-XX-PTD- FIG.
Need help?
Do you have a question about the Allure Series and is the answer not in the manual?
Questions and answers