Table of Contents
Advertisement
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Unfolding the stand base
1
.
Place the monitor with its front facing downward on a soft cloth.
2
.
Hold the stand base and lift it up following the sequence as shown in the picture.
3
.
Pull the stand base down at the same spot shown in the picture, and the stand will
be unfolded.
4
.
Place the monitor upright and adjust the stand
base to the desired angle. Adjust the stand
base's angle by holding the edges of the
monitor gently with both hands.
Important
This illustration depicts the typical connection procedure. Your monitor may differ from
the one displayed in the pictures above.
Do not touch or apply force to the monitor's screen while expanding or folding the
stand base.
A3
Advertisement
Table of Contents
