Table of Contents
Advertisement
Warning!
• Read each step carefully before beginning any installation and make sure you understand
each step.
• Keep children and pets away during heater operation.
• Do not use the heater without the grille in place.
1. Locating the heater
•
Place the heater (1) on a firm, level surface free from
obstructions, and at least 3' (0.9 m) away from any wall
(2) and any other combustible materials such as furniture,
pillows, papers, clothes and curtains. Also place it in an
upright position before turning on (fig. 1).
NOTE:
Make sure that the heater is placed in the coldest region/area
of the room.
2. Connecting the heater to the power supply
•
Make sure the power level switch (1) is in
Connect the power cord (2) of the heater into a grounded
120 V AC, 60 Hz outlet (3) (fig. 2).
Warning!
• Make sure the plug fits tightly in the outlet. A loose connection may cause overheating and
damage to the plug or heater.
• Disconnect the heater from the power supply when the heater is not in use.
NOTE:
The heater may emit a foul odour or smoke during its initial use, owing to the "burning off" of the heating element
lubricant. This is normal and will go away after a few minutes of use.
NOTE:
It is recommended to not use the heater around birds and pets until the manufacturing corrosion coating burns off
as those creatures tend to be sensitive to the fumes.
(OFF) position.
1
1
2
2
3' (0.9 m)
3
3
2
2
1
1
7
Advertisement
Table of Contents
