MuxLab ProDigital 500790 Operation Manual

MuxLab ProDigital 500790 Operation Manual

Hdmi/ip ptz camera 30x zoom, poe
Hide thumbs Also See for ProDigital 500790:

Advertisement

Quick Links

HDMI/IP PTZ Camera 30X Zoom, PoE
Operation Manual
(500790)
1
MuxLab © 2021
94-000962-A/SE-000962-A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ProDigital 500790 and is the answer not in the manual?

Questions and answers

Summary of Contents for MuxLab ProDigital 500790

  • Page 1 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual (500790) MuxLab © 2021 94-000962-A/SE-000962-A...
  • Page 2 All content in this manual is copyrighted, and cannot be cloned, copied, or translated without the express permission of MuxLab Inc. Product specifications and information in this document are for reference only, and the content may be updated from time to time without prior notice.
  • Page 3: Table Of Contents

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual Contents 1. Safety Notice ....................5 2. Supplied Accessories ..................6 3. Quick Start ..................... 6 4. About Product ....................7 4.1 Features ....................7 4.2 Specification ..................8 4.3 Main Unit Connections ..............10 4.4 Dimension ..................
  • Page 4 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 6.5 IP Camera accessed/controlled by WAN (internet) ......24 6.5.1 Setup IPC controlled by dynamic DNS........24 6.5.2 Dynamic DNS camera access ..........24 6.5.3 VLC stream media player monitoring ........24 6.6 IP Camera parameter setup ..............
  • Page 5: Safety Notice

    Never power on the camera before the installation is complete. ⚫ Do not dismantle the camera in any way MuxLab is not responsible for damage caused by unauthorized modification or dismantling. CAUTION! Specific frequencies of electromagnetic fields may affect the image quality of the camera!
  • Page 6: Supplied Accessories

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 2. Supplied Accessories When unpacking, check that all supplied accessories are included: • One (1) Camera • One (1) AC power adaptor • One (1) Power cord • One (1) RS232 cable •...
  • Page 7: About Product

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual Step2.Connect the power on the rear panel of the camera, and the power LED on the front will illuminate. Step3. During the power On sequence the Pan-Tilt function rotates the camera to its maximum upper right position, and then returns to the center position to complete the initialization process.
  • Page 8: Specification

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 4.2 Specification Camera HD: 1080p/60, 1080p/50, 1080i/60, 1080i/50, 1080p/30, 1080p/25, Signal System 720p/60, 720p/50, 720p/30, 720p/25 SD: 480i, 576i Sensor 1/2.7 inch, CMOS, Effective Pixels: 2.07M Scanning Mode Progressive Lens 30x, focal length of 4.42mm to 132.6mm, F-Stop of 1.8 to F2.8 Digital Zoom Minimal Illumination 0.05 Lux @ (F1.8, AGC ON)
  • Page 9 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual Video Stream First Stream, Second Stream First Stream resolution 1920x1080,1280x720,1024x576,960x540,640x480,640x360 1280x720,1024x576,720x576,720x408,640x360,480x270,320x240,3 Second Stream resolution 20x180 Video Bit Rate 32Kbps to 20480Kbps Bit Rate Types Variable bit rate and Fixed bit rate Frame Rate 50Hz: 1fps to 50fps, 60Hz: 1fps to 60fps Audio encode standard Audio Bit Rate...
  • Page 10: Main Unit Connections

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual MTBF >30000h 6.65” x 5.59” x 6.46” (169mm x 142mm x 164mm) Unit dimensions Unit Weight 3.0lbs (1.35Kg) Model Ordering Information 500790 HDMI/IP PTZ Camera 30X Zoom, PoE 4.3 Main Unit Connections 1 2CH AUDIO LINE IN interface 2 CVBS Interface 3 System Select Switch...
  • Page 11: Dimension

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 4.4 Dimension...
  • Page 12: Ir Handheld Remote Control

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 4.5 IR Handheld Remote Control 1. Standby Button Pressing this button toggles between “standby” and “normal power On” mode. (standby mode is approximately half the power consumption of power On mode) 2. Numeric Position Buttons To store or activate a preset position 3.
  • Page 13 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual [Far] button (to focus on far objects) and [NEAR] button (to focus on near objects) 10. Camera Select Buttons Press the button corresponding to the camera you want to operate with the remote controller. 11.
  • Page 14: Rs-232 Interface Pinout

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual Recalling the Preset with image Freeze: go to OSD main menu, then to the P/T/Z submenu, and then set "Freeze Image" to ON. Once this feature is enabled, the screen will freeze before going to a Preset.
  • Page 15: Serial Communication Control

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual The correspondence between the camera and the Mini DIN pin: 4.7 Serial Communication Control The camera can connect to a VISCA controller with an RS232C or and RS485 interface. • RS232 Communication Settings: The camera may be controlled via RS232 when set to the following parameters: Baud rate: 2400, 4800, 9600 or 38400 bit/s.
  • Page 16: Ptz Over Tcp/Udp Control

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual below command list. 4.8 PTZ over TCP/UDP Control The camera supports a TCP server via port number 5678. After the client establishes a TCP connection with the server, the client may send PTZ control commands to the server to be executed. A UDP server is also available via port number 1259.
  • Page 17: Osd Settings

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual following figure. 5. OSD Settings EXPOSURE Mode Auto 5.1 Menu ExpCompMode Press the [MENU] button to display the main menu Backlight on the screen. Use the arrow buttons to move the Gain Limit cursor to the item to be set.
  • Page 18: Color

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual DRC: DRC strength, Optional settings: 0 to 8. WB-Mode: White balance mode. Optional Bright: Intensity control, Optional settings: settings: Auto, Indoor, Outdoor, One Push, Manual, 00 to 17. (Effective only in Bright mode) and VAR.
  • Page 19: P/T/Z

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 5.5 P/T/Z IMAGE Move the cursor to the P/T/Z submenu in the main Luminance menu and press the [home] button. The P/T/Z Contrast submenu will appear as shown in the following Sharpness figure.
  • Page 20: Noise Reduction

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 5.7 Setup Call Preset Speed: Optional settings: 1 to 24 Pre Zoom Speed: Optional settings: 0 to 7 Move the cursor to the Setup submenu in the main menu and press the [home] button. The SETUP 5.6 Noise Reduction submenu will appear as shown in the following figure.
  • Page 21: Communication Setup

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 5.8 Communication Setup (When set to On, the 88 30 01 FF Command is Move the cursor to the Communication Setup useless) submenu in the main menu and press the [home] Net Mode: Set the serial port control or networking, button.
  • Page 22: Network Function

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 6. Network Function 6.1 Operating Environment Figure 1.2 Connect via router/modem Operating System: Windows 2000/2003/XP/ 6.4 IP camera control via LAN vista/7/8/10 Network Protocol: TCP/IP 6.4.1 Setup IP address Client PC: P4/128MRAM/40GHD and higher, The camera default IP address is: 192.168.100.88, supporting scaled graphics card with DirectX 8.0 If the camera IP address in unknown, it may be...
  • Page 23: Access Ip Camera Web Interface

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 192.168.100.88, then login with the username: "admin", and password: "admin". 6.4.2 Access IP Camera Web Interface your favorite browser input http://192.168.100.88 (note that the Microsoft browser may have a lower latency). The login window will pop up, then input the username: “admin”, and password: “admin”, shown as below: Method 2: Open "upgrade_En.exe"...
  • Page 24: Ip Camera Accessed/Controlled By Wan (Internet)

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual http://www.videolan.org/vlc,download and Install 6.5.2 Dynamic DNS camera access the VLC player software. After installation, login Set the domain name in the camera, setup the again to obtain the above screen: parameter, then the dynamic DNS can be used to access camera.
  • Page 25: Ip Camera Parameter Setup

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual rtsp://ip: port number/1 (First stream); Real time monitoring: displaying video image rtsp://ip: port number/2 (Second stream). Parameter setup: with function buttons A. Video viewing window NOTE! The Video viewing window must be set to the same The RTSP default port number is: 554.
  • Page 26 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual B. PTZ Setup Method 2: Type a preset name into the name field. Then click the "Set" button to save. To recall a preset position, click the "Call" button, or click a "No."...
  • Page 27: Video Setup

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 6.6.2 Video Setup 5) Bit Rate The user can set the bit flow/stream, and normally the larger the bit flow, the clearer the image will be. The bit rate setting must take into account the network bandwidth.
  • Page 28: Image Setup

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 6.6.3 Image Setup 6) Flip & Mirror Enable the Flip button to flip the image horizontally. Enable the Mirror button to flip the image vertically (from right to left). Default mode is disabled (buttons not selected).
  • Page 29: System Setup

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 8) ADTS Options 1) Lan Settings Optional settings: On or Off The Default IP address is 192.168.100.88. The 9) Apply/Cancel Button MAC address can be modified. Press the "Apply" button to save changes, or press 2) Port Settings the "Cancel"...
  • Page 30: Device Information

    "Apply" button to save the changes, or press the "Cancel" button to cancel the changes. 6.6.7 Device Information Shows the current device information, as shown below. 6.7 Downloading firmware updates Visit the MuxLab website at www.muxlab.com any updated firmware for this camera (model 500790), if any.
  • Page 31: Maintenance And Troubleshooting

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 7. Maintenance and Troubleshooting Camera Maintenance ⚫ If camera will not be used for a long time, please turn off the power, by disconnecting the power supply from the AC outlet. ⚫ Use a soft cloth or tissue to clean the camera cover. ⚫...
  • Page 32 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual and Install the VLC Player. After installation, login again, and the video image should be available. ⚫ Unable to access IP Camera by a browser. 1. Access the network with a PC to test whether the network works, to eliminate the possibility of a faulty cable, or network failure caused by a PC virus.
  • Page 33: Appendix - Visca And Pelco-D Command List

    HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 8. Appendix – Visca and Pelco-D Command List VISCA Command List Part 1: Camera-Issued Messages ACK/Completion Message Command Function Command Packet Comment z0 4y FF Returned when the command is accepted. ACK/Com (y: Socket No.) z0 5y FF pletion...
  • Page 34 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual Part 2: Camera Control Commands Command Function Command Packet Comment AddressSet Broadcast 88 30 01 FF Address setting IF_Clear Broadcast 88 01 00 01 FF I/F Clear 8x 01 04 00 02 FF CAM_Power Power ON/OFF 8x 01 04 00 03 FF...
  • Page 35 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual...
  • Page 36 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual...
  • Page 37 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual...
  • Page 38 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual...
  • Page 39 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual...
  • Page 40 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual...
  • Page 41 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual...
  • Page 42 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual...
  • Page 43 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual...
  • Page 44 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual...
  • Page 45 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual...
  • Page 46 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual...
  • Page 47 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual...
  • Page 48 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual...
  • Page 49 HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual 2321 Rue Cohen, Montreal, Quebec, Canada. H4R 2N7 Tel: (514) 905-0588 Fax: (514) 905-0589 Toll Free (North America): (877) 689-5228 E-mail: videoease@muxlab.com URL: www.muxlab.com...

Table of Contents