Opening the display
The display panel can be rotated in a wide range of angles for optimal
viewing.
To open the display, lift the panel up and adjust it to the best viewing angle.
While you open the display, hold the base of the computer to avoid raising
it.
Turning on the power
This section describes how to turn on the power
After you turn on the power for the first time, do not turn it off until you have
set up the operating system (OS) and the OS has started up
1. If the external diskette drive is connected, make sure it is empty. If a
2. Open the display panel.
3. Press and hold the computer's power button for two or three seconds.
User's Manual
Figure 3-3 Opening the display panel
diskette is in the drive, press the eject button and remove the diskette.
Figure 3-4 Turning on the power
Getting Started
.
Power button
3-3