Toshiba Satellite Pro A300D Series User Manual page 168

If there are 2 HDDs, the Boot Priority Options setting will be like the
following.
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
This procedure does not affect the settings.
* In this computer, CD-ROM refers to the DVD Super Multi (+-R DL) drive,
HD DVD-ROM drive or HD DVD-RW drive.
ExpressCard HDD boot is not supported.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. Use the up/down cursor keys to select boot device you want and
■
If a supervisor password is set, the menu above does not appear when
you use the user password to start the computer.
■
The selection method above does not change the boot priority settings
in HW Setup.
■
If you press a key other than one of those above or if the selected
device is not installed, the system will boot according to the current
setting in HW Setup.
User's Manual
U
N
1
2
C
press ENTER.
Selects the USB diskette drive.
Selects the network.
Selects the primary HDD.
Selects the secondary HDD.
Selects the CD-ROM*.
HW Setup and Passwords
7-5