Table of Contents
Advertisement
TO REPLACE JACK OIL
1. Position the jack on level ground and
lower the saddle.
2.Open release valve by turning handle
counter-clockwise.
3. Remove cover plate.
Cover plate
4. Remove the oil plug.
5. Turn the jack on its side to drain old oil
from the oil fill hole.
6.Position the jack on level ground and keep
saddle in the lowered position. Fill the oil
case until oil level is just beneath the lower
rim. Keep dirt and other foreign materials
clear when pouring.
7. Replace oil plug.
8.Replace coverplate and perform the Air
Purge Procedure.
Cover plate
www.eagleprojacks.net
Advertisement
Table of Contents
