POSSIBLE CAUSE(S)
SYMPTOM: Elements will not heat
•
Oven not plugged in.
•
Power switch on the control panel is off.
•
Control set below ambient temperature.
•
Doors are open.
SYMPTOM: Oven does not come to ready.
•
The oven has not reached preheat temperature.
•
Internal problem with main temperature control.
SYMPTOM: Convection fan does not run.
•
Oven is not plugged in.
•
Circuit breaker tripped.
•
Doors are open
SYMPTOM: General baking problems.
•
Thermostat out of calibration.
•
Improper oven venting.
*Denotes remedy is a difficult operation and should be performed by qualified personnel only. It is recommended, how-
ever, that All repairs and/or adjustments be done by your local Blodgett service agency and not by the owner/operator.
Blodgett cannot assume responsibility for damage as a result of servicing done by unqualified personnel.
WARNING!!
Always disconnect the power supply before cleaning or servicing the oven.
SUGGESTED REMEDY
•
Plug in electrical supply cord.
•
Set the control panel to COOK or OVEN ON.
•
Set to desired cook temperature.
•
Close doors.
•
Wait for oven to reach preheat temperature.
•
*
•
Plug in electrical supply cord.
•
Reset the breaker.
•
Close doors.
•
x
•
x
13
Maintenance
Troubleshooting Guide