Table of Contents
Advertisement
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.This
is normal and the image can be re-adjusted using automatic image setup and the image
controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat
Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to reattach the
CRT monitor temporarily until you have re-configured the system; preferably to 1920x1080
at 60Hz, which is a common display mode.
The display modes shown below have been optimized at the factory.
Table 2-2. Factory set display modes
DP timing:
Established Timings
1
2
3
Detail timing
1
Block1 detail timing
1
2
3
Block2 detail timing
1
2
2-8 Y25g-30 Flat Panel Monitor User's Guide
Support Timing table
640 x 480 @ 60Hz
800 x 600 @ 60Hz
1024 x 768 @ 60Hz
1920 x 1080 @ 60Hz
1920 x 1080 @ 120Hz
1920 x 1080 @ 144Hz
1920 x 1080 @ 240Hz
1920 x 1080 @ 300Hz
1920 x 1080 @ 360Hz
Hide quick links:
Advertisement
Table of Contents
