Connected Devices; Bluetooth - Elo TouchSystems M60 User Manual

Connected devices
The Connected devices application allows you to pair Bluetooth devices, NFC, and USB (Tethering File transfer MDI and PTP)
To setup, enter to System Settings

Bluetooth

Note: Make sure the BT device is on discoverable.
•
Tap Connection preferences.
•
Tap Bluetooth.
•
Tap toggle switch to ON
•
Tap + Pair new device.
•
From Available devices screen, tap a device to pair.
•
When a pairing request message appears.
•
Verify the pairing number is the same.
•
If the pairing requests a PIN, enter the PIN.
•
Tap PAIR, to connect.
•
When the Bluetooth device is successfully connected to mobile computer, the connection will show as Active or Connected.
Unpair a paired Bluetooth Device
•
Navigate back to 'Connected devices' screen, from AVAILABLE MEDIA DEVICES or PREVIOUSLY CONNECTED DEVICES.
•
Tap settings of the connected device (e.g. JBL Flip 3).
•
In the settings menu, it is possible to DISCONNECT, FORGET (to unpair the device) and to enable and disable Phone calls, Media
audio and Contact sharing.
User Manual – Elo Mobile Computer M60/M60C

→ Connected devices

.
BT Device Setting
UM600609 Rev A page 39 of 94