Download Print this page

Alien RAIN SILVER Series Setup Instructions

Download this manual

Designed, manufactured and distributed by

set up instructions

Need help?

Do you have a question about the RAIN SILVER Series and is the answer not in the manual?

Page 1 Designed, manufactured and distributed by set up instructions...
Page 2: System Setup
Follow this step by step guide to complete the installation of your system. SYSTEM SET-UP Place your pots in the desired location taking care to place them evenly and on a level surface. There is enough pipe included in the kit for the 15L pots to be 50-60cm plant centres and 30L pots at 60-75cm centres.
Page 5 Secure the RAIN™ Brain to a wall, away from possible water contact. Connections to “Power” and “RAIN™ pump” are shown. Connect the cable from the red drain pump in the header pot to the ALIEN adaptor by pushing the connector in and securing the lock ®...
Page 8 3500lph...
Page 10: System Operation
Planting into the system The fabric pot sits inside the plastic pot. It is made of a thick composite material and helps prevent the medium from entering into the system. We recommend adding the medium to the pot once placed inside the plastic pot.
Page 11 Warning: The ‘ON’ setting should only be used for cleaning the system. If left on permanently, pots can overfill. Cleaning the system The filter should be checked regularly. If using mineral based nutrients the filter should require minimal cleaning. Be aware using organic based nutrients and additives will require regular cleaning.
Page 12 Designed, manufactured and distributed by 01403 888276 Don’t forget to check us out on social media: info@alienhydroponics.co.uk @alienhydroponics...