Advertisement
Part 5
PROGRAMMING MODE -
2 2
Factory reset - EEPt
After a factory reset, all values are reset to the default values.
Entering set up mode.
You will see LqC1
Note
• Dryer default value
- Drying time
45 Minute
- Top off time
15 Minute
Press the PERMANENT PRESS or the DELICATES
Button until
appears in the display.
Press the START button.
Press the PERMANENT PRESS button until
appears in the display.
Press the START button, then factory reset is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Close the service door.
• Card type - Pull the service card.
Test Mode
Button
Display
1 5
Advertisement
