Advertisement
Part 4
OPERATING YOUR DRYER
1 1
Ready mode
The display LED shows each cycle price and cycle
LED toggle.
2 2
Select the cycle
Press the desired cycle and the start button. The
display LED will show the remaining time and the
selected cycle starts.
Note
The last 2 minutes of the remaining time are
always for the cool down portion.
3 3
Change cycle
You cannot change the cycle while the machine is
running.
But if the door is opened, the cycle is
ended and then the cycle can be changed.
4 4
Cycle finish
After the COOL DOWN of cycle, the machine
stops and LED display shows End.
If you press any key or open the door, the dryer
defaults to the ready mode.
5 5
Set the cycle time
Press cycle button, display led shows firstly
cycle time '10'.
You can only increase the cycle time by pressing
same cycle button. But if display led shows '1:40',
the cycle time return '10' by pressing one more
same cycle button
The cycle time will be set from '10'(10 minute)
to '1:40'(100 minute).
1 1
Advertisement
