Edison DAM100 Operating Manual page 7

5163420K_Instructions.qxd
REFERENCE
NUMBER
11
12
13
14
15
16
17
2.3 Features
• 50000 counts measurement
• AC V and DC V measurements reach up to 1000V.
• DC measurement accuracy reaches up to 0.03%.
• 0.01Ω resistance resolution and 1µV voltage resolution.
• Linear frequency measurement, logic frequency/duty ratio measurement.
• Capacitance measurement from 0.01nf to 5000µF.
• AC/DC true RMS measurement.
• dBm measurement
• Maximum value/minimum value measurement, Relative measurement.
• 50-segment analog bar display.
• Automatic shutdown/continuous working mode selection.
• Back light control.
• PC-LINK: USB infrared interface.
• PC display, record and graphics software.
• Overload protection.
• Sound alarm for wrong current measurement.
• Shock resistant rubberised meter casing with 1000V CATIII protection.
18/09/2009
High Accuracy Digital Multimeter with USB Interface
SYMBOL FUNCTION
D D C C
Indicating it is now in the DC measurement state,
while DC and AC displaying simultaneously,
indicating it is DC+AC measurement
Indicating it is now in the data-holding state
When measuring 50µF to 5000µF capacitor under
automatic range, for ensuring the accuracy of
measurement. It is necessary to perform the
measurement after fully discharging capacitor
while prompting the operator to wait.
Indicates low voltage of the batteries, showing
the batteries will need replacing soon.
Analog bar, indicating the measurement value
with a graphic mode.
Indicating the meter being in the state for sending
data to the USB interface of computer
The display zone for the meters measurement
value, showing all the measurement values
12:56 Page 7
7