Download Print this page

Whitehouse BEEHIVE BK-HPDH30 Instruction Manual

Full depth triple level

Download this manual

BEEHIVE

BUILDING INSTRUCTION MANUAL:

FULL DEPTH TRIPLE LEVEL

IMPORTANT

• Please read through instructions prior to constructing beehive.

• Ensure you have all listed parts and tools required for set up before beginning.

• A clean workplace is required for safe and easy construction of your beehive.

• Do not use any parts that are damaged (If this occurs, please contact your supplier).

Whitehouse

BEEKEEPING

BK-HPDH30

Page 1 Whitehouse Whitehouse BEEKEEPING BEEKEEPING BEEHIVE BUILDING INSTRUCTION MANUAL: BK-HPDH30 FULL DEPTH TRIPLE LEVEL IMPORTANT • Please read through instructions prior to constructing beehive. • Ensure you have all listed parts and tools required for set up before beginning. • A clean workplace is required for safe and easy construction of your beehive.
Page 2 Whitehouse Whitehouse BEEKEEPING BEEKEEPING NOTE FROM SUPPLIER: Please check and ensure you have all parts listed and tools required before commencing construction of your beehive. EQUIPMENT Pencil Mallet Drill Nail Hammer Ruler (3mm Drill Bit) (Supplied) PARTS IN THE BOX Baseboard Front &...
Page 3 14cm 14cm 14cm 14cm Diagram 2 Diagram 1 Marking Lines Placing Cleats Place the Base Board down on your workspace. See Diagram 1 Place the edge of your 2x Cleats within the 14 cm pencil mark as to identify where you need to use your pencil to mark where the shown in Diagram 2.
Page 4 Take your assembled Base Board and align the beehive walls with the Base Board Risers. Use your 9x 50mm nails to attach the assembled Base Board to the Beehive Box as shown. Complete assembly by placing the pre-assembled lid on top. Whitehouse Whitehouse BEEKEEPING BEEKEEPING...