Philips 202P4 Service Manual page 15

5) Press the . The ADJUST PURITY window appears. TOP LEFT is
highlighted.
6) To adjust the top left purity, press the
7) When the top left purity is adjusted, press the
TOP RIGHT.
8) To adjust the top right purity, press the
9) When the top right purity is adjusted, press the
highlight BOTTOM LEFT.
10) To adjust the bottom left purity, press the
button.
11) When the bottom left purity is adjusted, press the
highlight BOTTOM RIGHT.
OSD Adjustments (Continued)
or button.
button to highlight
or button.
button to
or
button to
12) To adjust the bottom right purity, press the
13) When the bottom right purity is adjusted, press the
to return to the EXTRA CONTROLS window. BACK TO MAIN
CONTROLS is highlighted.
Smart Help
After returning to EXTRA CONTROLS . . .
. . . to continue to ADJUST PURITY, press the
CALIBRATE is highlighted. Next, start with step 4 under EXTRA
CONTROLS - AUTO CALIBRATE.
. . . to exit completely, press the
AUTO CALIBRATE
EXTRA CONTROLS is a set of three features, including AUTO
CALIBRATE. Auto Calibrate regularly readjusts the color to its original
value for any of the ADJUST COLOR selections, including USER
PRESET. AUTO CALIBRATE also adjusts the luminance and black
level of the monitor, so that all three items remain at original settings.
This helps extend the useful life of the monitor. The calibration process
takes less than 6 seconds to complete.
1) Press the button on the monitor. The MAIN CONTROLS window
appears.
2) Press the button until EXTRA CONTROLS is highlighted.
3) Press the button. The EXTRA CONTROLS window appears.
DEGAUSS will be highlighted.
4) Press the button until AUTO CALIBRATE is highlighted.
15
202P4 M25P
Go to cover page
or button.
button
button until AUTO
button twice.