Philips 202P4 Service Manual page 13
Hide thumbs
Also See for 202P4:
- Electronic user's manual (130 pages) ,
- User manual (127 pages) ,
- Specification sheet (2 pages)
Table of Contents
Advertisement
4) Press the
or
button to select YES or NO. NO is the default. YES
returns all settings to their original factory adjustments.
5) Press the
button to confirm your selection and return to the MAIN
CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
Smart Help
After returning to MAIN CONTROLS . . .
. . . to continue to EXTRA CONTROLS, press the
CONTROLS is highlighted. Next, start with step 3 under EXTRA
CONTROLS.
. . . to exit completely, press the
EXTRA CONTROLS
DEGAUSS
EXTRA CONTROLS is a set of three features, including DEGAUSS.
Degaussing removes electromagnetic build up that may distort the color
on your screen.
1) Press the
button on the monitor. The MAIN CONTROLS window
appears.
2) Press the
button until EXTRA CONTROLS is highlighted.
3) Press the
button. The EXTRA CONTROLS window appears.
MOIRE will Be highlighted.
4) Press the
button to highlight DEGAUSS.
5) To degauss your screen, press the
degaussed, then the MAIN CONTROLS window will reappear. CLOSE
MAIN CONTROLS will be highlighted.
Smart Help
After returning to MAIN CONTROLS . . .
. . . to continue to ADJUST MOIRE, press the
CONTROLS is highlighted. Next, start with step 3 under EXTRA
CONTROLS, ADJUST MOIRE.
. . . to exit completely, press the
OSD Adjustments (Continued)
button until EXTRA
button.
button. Your screen will be
button until EXTRA
button.
ADJUST MOIRE
EXTRA CONTROLS is a set of three features, including ADJUST
MOIRE. Moire is a fringe pattern arising from the interference between
two superimposed line patterns. To adjust your moire, follow the steps
below. Note: Use only if necessary. By activating ADJUST MOIRE,
sharpness can be affected.
1) Press the
button on the monitor. The MAIN CONTROLS window
appears.
2) Press the DOWN CURSOR button until EXTRA CONTROLS is
highlighted.
3) Press the
button. The EXTRA CONTROLS window appears.
ADJUST MOIRE will be highlighted.
4) Press the
button. The ADJUST MOIRE window appears.
HORIZONTAL will be highlighted.
5) To adjust the horizontal moire, press the
7) When the moire is adjusted, press the
EXTRA CONTROLS window. BACK TO MAIN CONTROLS will be
highlighted.
After returning to MAIN CONTROLS to exit completely, press the
button.
202P4 M25P
13
Go to cover page
or
button
button to return to the
Advertisement
Table of Contents
