Troubleshooting; Delivery Set - Maxwell MW-3552 VT Manual Instruction

Storage
− Before taking the unit away for storage, pour out water from the water tank (2) and from the
operating chamber (4), wipe the operating chamber (4) dry.
− Do not store the unit with water in the water tank or if water remains in the operating chamber.
− Keep the humidifier in a dry cool place out of reach of children.

TROUBLESHOOTING

Failure
The operating indicator
is not lighting, no steam
formation
The operating indicator
is lighting red, no steam
formation
"Steam" has an
unpleasant smell
Small intensity of "steam"
output
Abnormal noise during
operation of the unit
NOTE:
Non-observance of rules for cleaning the unit from mineral deposits caused by hard water may
affect the overall performance of the unit. In this case clean the unit. If used water is too hard, use
household filters to purify water or mix tapping water with distilled water in proportion 1:1.

DELIVERY SET

Instruction manual – 1 pc.
Removable nozzle - 1 pc.
Removable water tank – 1 pc.
Removable water tank lid – 1 pc.
Instruction manual – 1 pc.
Technical specifications
Power supply: 220-240 V ~ 50 Hz
Power consumption: 30 W
3552.indd 9 3552.indd 9
Possible causes
No voltage, no power
supply
There is no water in the
water tank.
New device – it is
normal
Polluted or stagnant
water
Polluted "sprayer"
The unit is placed on
the uneven or unstable
surface
9
ENGLISH
Troubleshooting
Plug the unit
Plug in another, properly operating
device, to make sure that the socket is
in good operating condition.
Fill the water tank with water.
Unscrew the lid of the water tank, pour
out water and leave the unit for 12
hours in a cool dark place
Unplug the unit, remove the water
tank, pour out water, wash the water
tank, and fill the water tank with boiled
or distilled water.
Unplug the unit and clean the sprayer.
Unplug the unit and even the body
of the unit or move the humidifier to
another place.
09.09.2011 15:00:44 09.09.2011 15:00:44