Page 1
INSTRUCTION MANUAL PRODUCT TYPE DIGITAL ANGLE METER WITH MAGNET MODEL 7700-0001 DEAR USER MAIN FEATURES Thank you for purchasing this digital angle meter. Digital angle value readout ■ This manual will help you to use the many features +/- 2° ( rotating 90° at speed of 30°/sec) ■...
Start/setting button Up button Power on/reset button Down button Communication port Battery compartment Magnet SPECIFICATIONS 7700-0001 Note: Angle accuracy *1 ± 2° for 90° rotation @ 30°/sec *1: The accuracy of the readout is guaranteed Display range 0 ~ 999.0°...
BEFORE USING THE METER Battery Installation Auto Power Off Loosen the screw of the battery cap. The meter will auto power off after about 2 minutes ■ ■ idle for power saving. Insert two AAA batteries matching the -/+ polari- ■...
OPERATION 1. Put the meter on the wrench Get started fast Press to power on. ■ Press to set target angle. ■ Press to start the angle measurement. ■ Start rotation. ■ Rotation stop and the LCD will be flashing. ■...
SETUP MENU INTRODUCTION 6. Stop and wait for LCD Flashing From the current target angle screen, long press to ■ go into setup menu. As the angle meter does not move for a few ■ Continuously press can visit the direction menu, seconds, the LCD screen will be flashing and the record menu, record clear-all menu and current angle is holding on screen.
VIEW ANGLE RECORD CLEAR ALL RECORDS Visit the record clear-all menu. ■ Visit the record menu, press to select ■ Press twice to delete the all record data. the data number and view it. ■ will be shown) Press Press to select data If no record exists, will be shown.
COMMUNICATION MAINTENANCE AND STORAGE Precaution: Attention! 1. Communication function is only supported One-year periodic recalibration is necessary to maintain on some models. Check the model no. and accuracy. Please contact your local dealer for calibra- its specification before using communication tions.