LG F8K5XNK4 Owner's Manual page 14

3
Pull and save the foam block for future use.
• If the washing machine must be moved in
the future, the foam block will help prevent
damage to the washing machine during
transportation.
NOTE
• To prevent damage, do not remove the
foam block until Mini Washer is at the final
location.
4
Turn the top cover about 180 degrees.
• Cover the upper hole with the top cover
and install 4 type B screws to fix it in
place.
5
Attach the two back brackets on the rear
top of the Mini Washer by inserting 4(3)
type A screws in each bracket.
D
①
②
① D : 540~560 mm
14
MFL70280534_E.indd 14
6
7
Stacking holder
8
①
②
② D : 590~610 mm
NOTE
• Mini Washer will not work as a standalone
Place Main Washer on top of Mini Washer.
• Make sure the 4 legs are totally locked
and the holes of Mini Washer align with
the holes of Main Washer.
Securely attach the two appliances at the
corners using 14 type A screws.
• First, insert screws on each side. Then
insert screws on the front and back side.
NOTE
• It can be difficult to assemble if it is not
assembled in the proper order.
• Use two type C screws to assemble the
stacking holder.
1
1
2
Turn the feet of Main Washer slightly until it
is snugged up against Mini Washer. Loosen
the adjustable feet by turning them
clockwise for a half turn with a spanner.
Then tighten the four lock nuts. All lock nuts
must be tightened.
1
unit.
EN
Washer leg
Washer leg
3
2
Lock nut
2018. 10. 18. 오전 9:46