Table of Contents
Advertisement
20. Do not use power tools in damp or wet
location, or expose them to rain. Keep work
area well lighted.
21. Do not leave a connected tool unattended.
When not in use, disconnect tool from air
source.
22. Shut off air supply and discharge any residual
pressure from tool before removing hose,
making adjustments, changing accessories,
or storing tool.
23. Make sure tool is switched off, and your finger
off the trigger, before connecting to air supply.
24. Remove adjusting keys and wrenches before
turning on tool.
25. Keep visitors a safe distance from the work
area. Keep children away.
26. Give your work undivided attention. Looking
around, carrying on a conversation and
"horse-play" are careless acts that can result
in serious injury.
27. Do not force a tool or attachment to do a job
for which it was not designed. The right tool
will do the job better and more safely.
28. Repetitive
motions
constant vibration can be harmful to hands
and arms. Take frequent breaks and relax
hands during extended operation. Change
posture to avoid discomfort or fatigue.
29. Compressed air can be harmful if directed
toward sensitive areas of the body, and may
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in serious, or even
fatal, injury.
This means that if precautions are not heeded, it may result in minor injury and/or
possible tool damage.
4
JAT-500 HVLP Spray Gun
and/or
exposure
propel small particles caught in the air stream.
Exercise proper caution.
30. Use
only
improper accessories may be hazardous.
31. Maintain tools with care. Keep air tool clean
and oiled for best and safest performance.
32. Do not use combustible gases, carbon
dioxide, oxygen or any bottled gas as an air
source for the tool. These can present risk of
explosion and serious injury.
33. Do not lubricate the tool with combustible
liquids, such as kerosene, diesel or jet fuel.
34. Do not dispose of this tool with normal
household waste. Never dispose of the air tool
into fire.
Specific warnings for Spray Guns
35. Solvent and paint fumes can ignite causing an
explosion.
appropriate ventilation systems. It is the
responsibility of the owner to understand and
comply with
concerning hazardous materials.
36. Wear
appropriate
to
protection when using this spray gun.
37. Read, understand and follow all safety
warnings
manufacturer.
38. Do not spray flammable materials near open
flames, pilot lights or other sources of ignition.
recommended
Exercise
caution
any codes
or regulations
eye
and
by
the
material
accessories;
and
use
respiratory
and
solvent
Advertisement
Table of Contents
