Advertisement
ASSEMBLY
PrEParaTion
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are
missing, please contact Customer Service at (866) 985-7877, Monday-Friday, 9 a.m. - 6 p.m. EST or email
cservice@welltraveled.net.
Place all parts on a soft, level surface for assembly. Estimated Assembly Time: 15 Minutes | Do NOT overtighten hardware!
1
Attach the End Panels
Bolts w/ Washers
2
Wrench.
Hardware Used:
2
2
Install the Seat Back
through the small extensions at the bottom of the
Seat Back with the lower eyelets at the insides of the
rear of each End Panel. Insert a Bolt w/ Washer
through the holes in the Seat Back and into the
eyelets in each Side Panel. Tighten using the Hex
Wrench.
Align the eyelets above the previously aligned holes
in the Seat Back with the holes at the top rear corner
of the Side Panels. Insert a Bolt w/ Washer
each Side Panel into the Seat Back and tighten using
the Hex Wrench.
Hardware Used:
2
1
Check all hardware. Your Miles Wicker Bench is now ready for use!
Contact us for assistance: (866) 985-7877 | www.wtliving.com
D
to the Seat
C
and
B
as shown. Tighten using the Hex
Bolts w/ Washers (6x40mm) x6
A
by aligning the holes drilled
1
Bolts w/ Washers (6x40mm) x2
Bolts w/ Washers (6x60mm) x2
with 6
C
2
1
through
2
B
A
1
2
2
D
4
Advertisement
