Fujitsu GENERAL ARHG72LHTA Design & Technical Manual page 46

5. Pressing the "+" or "-" button, to select the function number. Then press the "ENTER" but-
ton.
6. Pressing the "+" or "-" button, to select the setting number. Then press the "ENTER" button.
・When the data was not set up on the indoor unit
(" --" is displayed.)
・Set up the data again.
Pressing the "ENTER" button to return to the address selection screen.
If setting has been completed, pressing the "MENU" button to return to the Menu 2 item se-
lection screen.
Error
・When the data was normally set up on the indoor unit.
- 42 -
Function number
Setting number
Example: Function number 30
Setting number 01
Good