Device Layout; Specification; Using The Wireless Charger - XD XCLUSIVE Vibe P308.86 Series Manual

ENGLISH
Device Lay-out:
1. USB output ports
2. LED indicator light
3. Wireless charging LED indicator light
4. Micro USB-in
5. Wireless charging surface

Specification:

Coils:
Input:
Wireless Output:
Wired Output:
Material:

Using the wireless charger:

• Make sure your phone is compatible for wireless charging.
• First plug the wireless charger using the included micro USB cable into the
USB port of your wall adapter. Please note charging speeds depends on the
input power into the wireless charger.
• Place your mobile phone on the charging pad. You can check the charging
status on the screen of your phone.
Warning!
• Some phone cases may block the wireless charging
• Do not place other materials, like metal objects, magnets, and magnetic stripe
cards, between the mobile device and the wireless charger pad.
• When the mobile device is not placed on the charging surface accurately, your
mobile device may not charge properly.
• Please do not expose the device to moisture or heat sources.
• This is not a toy, not suitable for children under the age of 7.
• Do not disassemble, attempt to open, or break the product.
• Keep away from fire and water.
• Keep a distance of 20cm between the product and implantable medical
devices to avoid potential interference.
• If you use the wireless charger in areas with weak network coverage, you may
lose your network reception.
• Check your mobile device's battery percentage using the charging icon
displayed on the screen of your phone.
1pc
5V/2.0A
5V/1A 5W
DC 5V/2.0A
ABS + Aluminum
Important: only use included accessories
or certified and tested accessories to
charge this device. Using third party
accessories can influence the item safety.
4.
5.
3.
2.
1.
1.