Table of Contents
Advertisement
Quick Links
item #1005 967 607
model #Fdm-19F02
Use and Care GUide
spray Foam dispensinG GUn
Questions, problems, missing parts? Before returning to the store,
call Anvil Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-877-527-0313
HOmedepOT.cOm
THANK YOU
We appreciate the trust and confidence you have placed in Anvil through the purchase of this spray foam dispensing gun. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Anvil!
Advertisement
Table of Contents
Summary of Contents for Anvil FDM-19F02
- Page 1 THANK YOU We appreciate the trust and confidence you have placed in Anvil through the purchase of this spray foam dispensing gun. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home...
-
Page 2: Table Of Contents
Table of Contents Table of contents ........2 Installation . -
Page 3: Pre-Installation
pre-installation pLANNING INSTALLATION This gun has been designed for use with polyurethane foams and should not be used for any other application. This gun is used for various repair and building works, such as door and window replacement, joining various frame constructions, silencing and sealing gaps in walls. noTe: only use the gun in adequately ventilated rooms with the correct respiratory protection equipment. -
Page 4: Installation
installation Control Bead Size With Flow Control Loading a can of product Knob □ Shake can vigorously for 30 seconds prior to installing can □ Use the flow control knob on the back of the gun to vary on to foam gun. bead size. -
Page 5: Operation
operation Trigger Control Changing a Can of Foam □ The foam dispensing gun trigger can be metered so the □ After emptying a can of Insulating Foam Sealant or Adhesive, harder it is pulled, the faster the foam will be dispensed. To tighten the flow control knob to close it, then remove the apply foam to smaller gaps, pull on the trigger less. -
Page 6: Maintenance
maintenance □ If the gun is not to be reloaded it must be cleaned as soon as possible after the cartridge has been removed to avoid hardening of the foam inside the gun. Care and Cleaning □ Always ensure all foam is released from the gun before cleaning. □... -
Page 7: Service Parts
service parts part description Quantity part description Quantity Long nozzle Spring Plastic bushing Nozzle Plastic bead Seal ring Seal ring Needle Paper gasket Connecting sleeve Can housing Gasket Flow control knob o-ring Spring handle Gun barrel Screw Connecting nut Rivet Gun body Trigger Screw... - Page 8 Questions, problems, missing parts? Before returning to the store, call Anvil Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-877-527-0313 HOmedepOT.cOm Retain this manual for future use.