Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Blumil Segway
Summary of Contents for Blumil Segway
- Page 1 USER MANUAL...
-
Page 2: Table Of Contents
Table of Contents Introduction ................3 Steps to Set-Up your Blumil ............. 4 Adjustments ................6 Tips for Riding the BLUMIL ............. 10 Blumil Warranty ..............11 Warnings and Disclaimers ............12 Returns ................... 15... -
Page 3: Introduction
Segway® from strictly a seated position. Thanks to the Blumil, users can mount and dismount the Segway®, ride and steer the Segway®, and come to a relaxed, seated, ‘at rest’ stop on the Segway®, all without the... -
Page 4: Steps To Set-Up Your Blumil
Steps to Set-Up your Blumil Installation of the BLUMIL to the Segway® base is quite simple and takes around 10 minutes. Step 1: Removing the Lean Steer Frame i2, x2 i2 SE, x2 SE Remove the locking wedges Remove the red cap with the... - Page 5 Step 4: Remove the 4 corner plate deck bolts with the T27 wrench (included). Step 5: Place the BLUMIL unit on the Segway® base and use the 4 corner screws to fasten it with the T27 wrench. Step 6: Install the provided steering hub adapter. The attached...
-
Page 6: Adjustments
10 minutes. Adjustment 1: The Landing Feet Place the assembled BLUMIL on a level surface and deploy the Parking Mechanism (while not mounted). Do this by pulling the Parking Lever until you hear a “click”. Only then it is securely locked. - Page 7 Adjustment 2: Sensor plates Always make sure that the plates are above the Segway weight sensors. You can easily move them forward and backward by moving the screw.
- Page 8 Deploy the Parking Mechanism, dismount the BLUMIL, loosen the 4 corner screws used for securing the Blumil to the Segway® base and slide the seat plate further back. Remember to securely tighten the screws later on.
- Page 9 If the seat is properly centered for the rider’s weight distribution, the BLUMIL will remain stationary with the rider positioned comfortably upright. This is the only time a rider should be required to make this adjustment unless there is a change in their weight distribution...
-
Page 10: Tips For Riding The Blumil
Tips for Riding the BLUMIL Now that the BLUMIL and Segway® base are one, and the completed product is properly fitted to the individual rider, it is time to ride! There are some basic steps the rider should take to familiarize him or herself to the unique riding style of the BLUMIL. -
Page 11: Blumil Warranty
This is NOT a warranty of the Segway® or any Segway® components. Segway® warranty issues will need to be addressed directly with Segway®. -
Page 12: Warnings And Disclaimers
Segway® manual before they attempt to ride the BLUMIL. • The rider must be able to stay in the BLUMIL. If the rider slips off the seat, he or she will fall and risk being injured. - Page 13 • Riding the Segway® risks serious injury or death from falls, loss of traction, loss of balance, collisions and other accidents. • To reduce the risk of injury, read the Segway® manual and the BLUMIL manual to learn safe mount, dismount and riding procedures.
- Page 14 • Do not attempt to ride when the battery indicator on the Infokey displays no bars. • The BLUMIL floats to a stop as the center of gravity is shifted opposite the direction of travel. Failure to begin stopping early enough can result in collision, accident, serious injury or death.
-
Page 15: Returns
If you are dissatisfied with the Blumil for any reason, you may return it for a full refund, less dollar $150.00 restocking fee, if you return it to Blumil or its Reseller within 30 days from the date of original purchase. All returned Products must be returned in resalable condition in the original packaging.
Need help?
Do you have a question about the Segway and is the answer not in the manual?
Questions and answers