Page 1
Before commencing assembly,please read these instructions thoroughly. Zero Fighter SPECIFICATION SAFETY PRECAUTIONS ! Warning! This radio control model is not a toy! Wing Span: 2320 mm (91.3in) Wing Area: 93.4 dm (1448 sq.in) First-time builders should seek advice from people having building Total Length: 2100 mm (82.7 in)
REQUIRED FOR OPERATION (Purchase separately) A minimum 6channel radio for airplanes (with 8servos). Silicone Tube And dry batteries. Fuel Filter CAUTION:Onlyuseaminimum6channelradiofor Glow engine fuel only. airplanes!(Nootherradiomaybeused!) Required for engine starting A minimum 8 channel WARNING: Normal gasoline cannot transmitter for airplanes. be used with glow engines.
Page 4
Accessory list for this page. Install the servo 3mm Lock nut 3X16 Screw M3X80mm rod Rod adjuster Rod adjuster HORN 2.6X12mm Tp Screw Hinge Hinge Install the aileron and flap Install the servo of aileron Aileron Flap 3mm Lock nut Servo line 3X16 Screw M3*80mm rod...
Page 5
Accessory list for this page. Install the elevator servos Hinge Rod adjuster - - - - - - - - 6 3mm Lock nut M3X80mm rod 3X16 Screw Rod adjuster HORN--4 Ball bearing - - - - - - 2 2.3x10mm Tp Screw Ball bearing Rod adjuster...
Accessory list for this page. Installing the drop tank butterflynut(M8) ---------4 Droptank ------------1 Droptankrack ------------1 M3x12mmscrew ------------2 3x20mmTpscrew 3x20mmTpscrew Droptankrack Droptank ------------2 ------------1 ------------1 ------------2 Main wing (Put the servo line into the fuselage) Installing the drop tank to the fuselage butterflynut(M8) ---------4 M3x12mmscrew...
Page 9
Installing the ply plate Accessory list for this page. ---Scaleexhausttubes---7 ----2.6x12Tpscrew------7 ---Plyplate(6mm)----1 Angleironframe----------4 ----Plyplate(3mm)---1 ----3x20mmscrew--4 ---------Angleironframe----------8 --pushrod2x100mm---1 ----2.6x12Tpscrew-----3 ------M4x20mmscrew------------8 LinkageStopper---1 Aluminiumtubes---2 ----Plyplate(3mm)---1 M2x10mmscrew-----2 Copperjoiner---2 ----2.6x12Tpscrew-----3 Retainer(M3)--------2 Installing the ply plate Install the scale exhaust tubes ---Plyplate(6mm)----1 ----3x20mmscrew--4 ---Scaleexhausttubes---7 ----2.6x12Tpscrew------7 Angleironframe----------4 Install the scale exhaust tubes Assembly of the rudder servo Fuel tank...
Page 10
Install the canopy Accessory list for this page. Autenna-----------1 3x20mmscrew----6 Washer----------6 Install the canopy Install the canopy --------------Autenna-----------------1 Install the cowling Install the canopy ------3x20mmscrew----6 ------------Washer----------6...
Page 11
Adjustment. Adjustment Adjust the travel of each control surface to the Adjust the travel of each control surface to the values in the diagrams. values in the diagrams. These values fit general flight capabilities. These values fit general flight capabilities. Readjust according to your needs and flight level.