Advertisement
Quick Links
Advertisement
Related Manuals for BigPlanes TOPRC J0005
Summary of Contents for BigPlanes TOPRC J0005
- Page 1 第 1 页...
- Page 2 第 2 页...
- Page 3 第 3 页...
- Page 4 3. Apply instand type AB glue to the holes in the aileron Accessory list for the installation of aileron and flap. and hinges. Epoxy the aileron to the wing. 1. Apply instand type AB glue to the holes in the flap and 4.
- Page 5 9. Fix the servo trays with servo assembled to the wings 6. Assemble the servos to the servo trays. with screws. 10. Connect the fiber horns to the servo arms with the 7. Servos assembled ready. linkage and lock each side with screws and nut. 8.
- Page 6 14. Assemble the servos to the stab servo trays and also 12. The picture when the bomb assembled to the wing. rudder servo tray. Accessory list for the installation of elevator and rudder. 15. Assemble the servos to the stab servo trays. 16.Fix the servo trays to the stab with screws, Connect 13.
- Page 7 17.Assemble the servo tray with servo assembled to the tail 19.Assemble the servo to appropriate position in the fin. fuselage of the belly brake section. 20.Connect the plastic horn in the belly brake to the 18.Connect the fiber horns to the servo arms with the servo arm with the linkage and lock each side with linkage and lock each side with screws and locknuts.
- Page 8 21.Trim slots in the gear door,glue the pin hinges into the 24.Assemble the servos of gear doors to the fuselage, trim gear door and fuselage, assemble the gear door to the a lot to appropriate position on the gear house of the fuselage with screws.
- Page 9 26.Fix the the plastic horn base to propriate position on the fuselage with glue and screw, assemble the plastic 29.Assemble the nose retract to the fuselage with screws horn to the nose half gear door with glue and screws. and assemble the back half nose gear door. 27.
- Page 10 34.Assemble the main gear door to the landing gear Accessory list for the installation of main gear. with screws. 32.Assemble the main retracts to the wings. 35.The picture when the main gear up. 33.Glue the plies to the socket rings on the landing gear. Accessory list for the installation of tail pipe.
- Page 11 36.Put the fuselage plugs to one fuselage, assemble the two 39.Assemble the engine and tail pipe to the fuselage fuselage together through the fuselage plugs. with screws. 37.When the fuselages be assembled together, fasten them with screws from the fuselage. The accessory list for fix the wing 38.Assemble the fuel tank to the fuselage.
- Page 12 41.Lock the wings from the holes on the bottom fuselage with 43. Assemble the nose cover to the fuselage with screws. rubber band. 42.Assemble the stab to the fuselage through the stab tubes and lock them with screws. 44.The picture when the hunter assemble ready. 第...
- Page 13 45. Adjust the travel of each control surface to the values 46. Adjust the travel of each control surface to the values in the diagrams. These values fit general flight in the diagrams. These values fit general flight capabilities.Readjust according to your needs and flight capabilities.Readjust according to your needs and flight level.
- Page 14 第 14 页...