Advertisement
Transmitter
In case of some problems arise in this transmitter unit, have to change the transmitter unit itself, due to avoid the law of radio regulation.
Receiver (Headphones)
R
Housing R
E
(1) Remove the one screw A and two screws B attaching the housing L assy
(2) Disconnect the connector of rechargeable battery from switch P.C.B.assy.
(3) Remove the two screws C attaching the switch P.C.B.assy.
(4) Remove the three screws D attaching the housing R.
(5) Remove the two screws E attaching the main P.C.B.assy.
(6) Remove the two headband spring F attaching the elastic band for L and R respectively.
(7) Remove the two screws G attaching the speaker holder assy for L and R respectively.
(8) A ear pad and a speaker pad on either side are removed.
(9) A drive unit is removed from a speaker holder, pressing down three hooks.
(10) Remove the four screws H attaching the headband assy, and remove it.
SECTION 2
DISASSEMBLY
Main P.C.B. Assy
E
b
b
G
D
Drive unit
Ear pad
Speaker pad
Drive unit
Speaker holder
Headband assy
Elastic band
H
D
Speaker holder
Speaker pad
Ear pad
A
Switch P.C.B. Assy
a
a
C
G
Charge P.C.B. Assy
b
b
a
a
F
F
Rechargeable battery
L
Housing L assy
B
(No.XC010)1-3
H
Advertisement
