Mechanical Installation; In-Wall Installation - Uponor KaMo Combi Port Base Installation And Operation Manual

5 Mechanical installation

5.1 In-wall installation

Included parts
A
E
F
G
H
Item Description
A Cabinet body
B Coin lock
C Frame
D Supporting plate for dry construction
E Bracket without hole
F Wingnut
G Bracket with hole
H Screed baffle plate
I Door
10 | Combi Port Base |
B
C
D
I
Installation and operation manual
Preparations
Item Description
A Cabinet body
B Frame
C Door
1. Dismount the frame and door.
2. Store the frame and door for later mounting.
CD0000281
Adjusting the in-wall cabinet
The in-wall cabinets are adjustable inside the niche in height and
depth.
The niche height is calculated using the floor height and is measured
from the bare floor. The specified floor installation height has to be
set according to the values visible on the feet.
Dimensions of in-wall mounted
cabinet (width x height x depth
mm)
610 x 840 x 110
750 x 1190 x 110
f =
0 - 2
0 0
Niche dimensions in-wall (width
x height x depth mm)
630 x (840 + 30 + f) x 115
770 x (1190 + 30 + f) x 115
A
B
C
CD0000240
CD0000349