Advertisement
7-2. WHEN REPLACING THE PANEL OR WHEN AN OLD PWB DOES NOT OPERATE
When the white balance setting information is reset in the PC system input mode, the setting information of the AV system input mode is
reset, too. Therefore, be sure to reset in the PC system input mode.
1 ) Select the PC system input mode with [INPUT] button.
Select one of DVI-I, DisplayPort and HDMI1/2/[PC] modes.
2 ) Any image is displayed on the screen.
3 ) SERVICE MENU2 is displayed.
4 ) Select "WHITE BALANCE SETTING" with [VOL+ ()], [VOL-
()] buttons, and press [ENTER] button.
The WHITE BALANCE SETTING menu is displayed.
"(PC)" is displayed on the title column.
5 ) Select "LEVEL" with [VOL+ ()], [VOL- ()] buttons and
press[ENTER] button. The LEVEL menu is displayed.
6 ) Select "RESET" with [VOL+ ()], [VOL- ()][BRIGHT- ()]
[BRIGHT+ ()] buttons and press [ENTER] button.
7 ) Check to confirm that the set value is changed as shown
below.
LEVEL (PC)
LEVEL1
LEVEL2
LEVEL3
LEVEL4
LEVEL5
LEVEL6
OK
CANCEL
8 ) Select "OK" with [BRIGHT- ()] [BRIGHT+ ()] buttons, and
press [ENTER] button.
The display returns to the WHITE BALANCE SETTING menu.
PN-K321/K322B SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4 - 15
<
48
>
<
96
>
<
144
>
<
192
>
<
224
>
<
255
>
RESET
9) Select "RESET" with [VOL+ ()], [VOL- ()][BRIGHT- ()]
[BRIGHT+ ()] buttons and press [ENTER] button.
10) Check to confirm that all the set value is changed as shown
below.
WHITE BALANCE SETTING (PC)
LEVEL
=>
L1
R: 194 G: 187
L2
R: 383 G: 375
L3
R: 577 G: 563
L4
R: 764 G: 751
L5
R: 892 G: 876
L6
R: 1020 G: 998
OK
CANCEL
11) Select "OK" with [BRIGHT- ()] [BRIGHT+ ()] buttons, and
press [ENTER] button.
The WHITE BALANCE SETTING menu is terminated.
12) Perform the WHITE BALANCE setting read procedures to
check that all settings have been properly changed.
B: 177
B: 367
B: 554
B: 738
B: 859
B: 976
RESET
Advertisement
