LG 55UH5E Owner's Manual page 62

24
[Background Image]
This feature enables you to set the default background image.
• [Booting Logo Image]: Change the logo image that appears when the device boots up. If you set this option to Off, no
logo image appears when the device boots up. Download or initialize an image file on the storage device.
• [No Signal Image]: Change the image that appears when there is no signal. If you set this option to Off, no image
appears when there is no signal. Download or initialize an image file on the storage device.
NOTE
• To download an image, an image file must exist in a folder named "LG_MONITOR" or "lg_monitor" in the external
memory (USB).
• Supported image file formats : "BMP" , "JPG"
• The maximum downloadable resolution is as follows, depending on the model.
Full HD
Ultra HD
86 "Ultra Stretch
88 "Ultra Stretch
[Input Manager]
You can set the PC or DTV label for each external input.
[SIMPLINK Setup]
• When the [SIMPLINK Setup] is set to [On], you can use the SIMPLINK provided by LG Signage.
• [Device ID]: Set the ID of the device connected via CEC wiring. You can choose a value between [All] and [E].
• [StandBy]: Sets the scenarios for sending and receiving the Standby command. Detailed scenarios are as follows:
All
Send Only
Receive Only
Boot logo image
1920 x 1080
1920 x 1080
1920 x 300
1920 x 540
Transmission
O
O
X
No signal image
1920 x 1080
3840 x 2160
3840 x 600
3840 x 1080
Reception
O
X
O