Other External Component Operations - JVC KD-G357 Instructions Manual

Indications
TAG DISPLAY
Tag display
AMP GAIN
Amplifier gain control
IF BAND
Intermediate
frequency band

Other external component operations

You can connect an external component to the
AUX (auxiliary) input jack on the control panel.
Portable audio player, etc
~
• You can also select "AUX IN" as the playback
source by pressing the SRC (source) button.
16
Item Selectable settings, [reference page]
( : Initial)
• TAG ON : Shows the Tag information while playing MP3/WMA tracks, [12].
• TAG OFF : Cancels.
• LOW POWER : VOLUME 00 – VOLUME 30 (Select this if the maximum power of the
speaker is less than 50 W to avoid them from damaging the speaker.)
• HIGH POWER : VOLUME 00 – VOLUME 50
• AUTO : Increases the tuner selectivity to reduce interference noise between
close stations. (The stereo effect may be lost.)
• WIDE : Subject to the interference noise from adjacent stations, but the
sound quality will not be degraded and the stereo effect will remain.
3.5 mm stereo mini
plug (not supplied)
Ÿ
Turn on the connected component and
start playing the source.
!
Adjust the volume.
⁄
Adjust the sound as you want. (See
page 13.)
To check the other information while
listening to an external component
AUX IN Ô Clock