Parts And Functions; Control Panel - Philips 50BDL3010Q User Manual

2.

Parts and Functions

2.1.

Control Panel

9
[ ] button
1
Turn the display On or turn the display to standby mode.
[MUTE] button
2
Mute the sound or reactivate sound.
[INPUT] button
3
Select an input source.
[ ] button
4
• Increase the audio output level
• Enter into the submenu while OSD menu is on
[ ] button
5
• Decrease the audio output level
• Back to previous menu while OSD menu is on
[ ] button
6
• Move the selected item one level up while the OSD menu is
On
• Increase the adjustment.
[ ] button
7
• Move the selected item one level down while the OSD menu is
On.
• Decrease the adjustment.
[MENU] button
8
Return to the previous menu while the OSD menu is On. This
button can also be used to activate the OSD menu when the OSD
menu is Off.
MUTE INPUT MENU
1 2 3 4 5 6 7 8
Remote control sensor and power status indicator
9
• Receives command signals from the remote control.
• Indicates the operating status of the display without OPS:
- Lights green when the display is turned On
- Lights red when the display is in the standby mode
- When {SCHEDULE} is enabled, the light blinks green and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned off
* Use an IR sensor cable for better remote control performance.
(Please refer to the instructions of 3.5)
4