IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all Instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Page 4
What is in the Box The Baby Ambre Endpoint • Power cord (only Euro or USA based power cords) • 1x UTP cable 1.5 mtr • Made by ALL Engineering is a trade mark of Roon labs...
Page 5
Connections Caution! Please connect your interconnects first before connecting the mains power cable! Power requirements: De product is made to handle mains voltages between 90 and 260 • Volts. LAN (local area network) input: Connect an UTP cable with your local network. The Baby •...
Roon music server. Caution! When the Baby Ambre is starting up for the very first time it will look for any kind of update when available. During this period the led is still flashing and can take more time (max 10 minutes) than usual.
Page 7
Made by ALL Engineering is a trade mark of Roon labs...
Page 8
How to make the Ambre visible in Roon When the Baby Ambre is connected and full operational (no blinking blue light) your Roon • user interface will detect the presence of the Ambre. Go to settings > audio. The next screen is visible: •...
Page 9
Enable the Baby Ambre for your network and give it a name for the area in use (for instance • living room , kitchen or bedroom) Now the Baby Ambre is ready for use. Made by ALL Engineering is a trade mark of Roon labs...
Page 10
The last step is to select the right output device for the specific room. Go to the right bottom • in your Roon user interface and select the right source by clicking on the Icon. Made by ALL Engineering is a trade mark of Roon labs...
Page 11
Technical specs : Working principle: Linux based Roon end point Power supply: 5 VA Power consumption: Full operation 3.5 Watts Power requirement: 90 -260 V AC Inputs: Lan (local area network) max. 100 Mbps Outputs: 1x optical Toslink, 1x RCA coax, Sampling frequency: Optical : 44.1 - 96 kHz sampling.
Need help?
Do you have a question about the Baby Ambre and is the answer not in the manual?
Questions and answers