Electrical Schematic Diagram - Homa HMC-8419R Instruction Manual

EN: AIR COOLER AND HEATER | Instruction Manual
1. CLEAN THE AIR FILTER
Cut off the power supply and unscrew the fan with a manual screwdriver. Then the filter screen can be dismounted. Use a
mild detergent and banister brush to clean the screen and wash it with clean water, Make sure that the filter is completely dry
before installing and operating the unit.
2. CLEANING THE WET CURTAIN
Firstly, cut off the power supply and then remove the air filter screen in order to take out the cooling pad from back cover and
clean it using tap water only. Next use a mild detergent and banister brush to clean the plastic filter mesh and wash it with
tap water and let it dry.
3. CLEANING THE WATER TANK
Cut off the power supply; remove the air filter screen down, and then remove the water tank.Remove the dirt in the tank by
using a wet towel with a mild detergent. After that, wash and rinse it with clean water & wipe it with a piece of dry cloth.
4. CLEANING THE OUTER COVER
Clean the outer cover with a mild detergent and a piece of soft and damp cloth.
Attention:
• Disconnect the power supply before cleaning the unit to avoid electric shock.
• Do not allow water to remain in or on the control panel.

ELECTRICAL SCHEMATIC DIAGRAM

6