Setting Up Your Router For Internet Access - NETGEAR WNR834 Setup Manual

Setting Up Your Router for Internet Access

When configuring your wireless router manually, you must log in to your wireless router to set it
up initially and to make any changes to your wireless router's settings later.
The factory default state is restored when you use the Factory Restore button. See
"Restoring the Default User Name and Password" on page 34
To access the router using its login name and password:
Type http://www.routerlogin.net in the address field of your browser, then click Enter.
1.
You can enter any one of two addresses to connect to your wireless router:
http://www.routerlogin.net or http://www.routerlogin.com.
A login window similar to the one shown in
Figure 11
When prompted, enter
2.
Password, both in lowercase letters. (For security reasons, the router has its own user name
and password.)
The router user name and password are not the same as any user name or
password you may use to log in to your Internet connection.
Installing Your Router Manually (Advanced, Mac, and Linux Users)
for the router User Name and
admin
Figure 11 will display.
password
for more information.
for the router
17