Removal And Installation Of Drawer; Ice Preparation - LG GC-B409SLQK Owner's Manual

NOTE
The guarantee does not cover mechanical
damages (cracks, shears, dents, traces of
enclosure opening, etc.) caused by
violation of the refrigerator storage,
transportation, operation, and
maintenance rules, application of
excessive force.
REMOVAL AND INSTALLATION OF
DRAWERS IN FREEZING
COMPARTMENT
When a large quantity of foodstuffs is stored
in the freezing compartment, you can remove
the middle drawer from the appliance and
store foodstuffs immediately on foodstuffs
placed to the lower drawer.
To remove any drawer of the freezing
compartment, proceed as follows:
1. Pull the drawer all the way out;
2. Raise it by the front part and pull.
To install any drawer back to the freezing
compartment, proceed in the reverse
sequence:
1. Place the drawer onto the guides at
an angle 45°;
2. Lower the front part of the drawer in
parallel to the guides;
3. Push the drawer all the way in.
At that, you should take care to exclude
slant.
2
1
1
CAUTION!
Do not apply excessive force to remove the
drawers and shelves – this may result in
damage of the refrigerator.

ICE PREPARATION

Fill the ice tray with water and place it to
the freezing compartment.
If ice cubes are required as soon as possible,
activate the "QUICK FREEZE" function.
To remove ice cubes, hold the tray on ends
and slightly bend it.
WARNING
Fill with potable water only.
To easily remove cubes, water the tray in
advance.
16
Operation
2
3