Before First Use; The Autodose Technology (Autodosing) - AEG L6FQW942G User Manual

7.3 Multilingual badges
Adhesive badges in different languages
are supplied with the appliance.
The desired badge can be glued next to
the programme dial.

8. BEFORE FIRST USE

During installation or before
first use you may observe
some water in the appliance.
This is a residual water left
in the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.

9. THE AUTODOSE TECHNOLOGY (AUTODOSING)

Read this chapter carefully.
9.1 Introduction
Right detergent and fabric softener
dosage takes better care of the laundry
and ensuring good wash performances.
Too much detergent damages your
clothes and too little doesn't ensure good
wash performances.
This appliance is equipped with an auto
dosing system able to automatically
provide the right detergent and fabric
These indicators will appear next to detergent tank
tank indicators when increasing or decreasing the automatic deter‐
gent or softener dosage.
3. Make sure to fill the AutoDose tanks
with liquid detergent
softener . Refer to "AutoDose
basic setting " paragraph in "The
AutoDose technology" chapter.
4. Pour 2 litres of water inside the drum.
This action activates the drain system.
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
softener dosage to preserve the fabric
integrity and colour brightness.
ENGLISH 21
and softener
and fabric