Table of Contents
Advertisement
IX. Replacing the O-rings
Replace the two O-rings if damaged or at least once per year.
1) Use the O-ring Remover tool
provided to lift and remove
the O-rings.
2) Carefully
installation.
3) Install O-rings by stretching
and lifting O-ring into the
groove. Do not roll the
O-ring or allow it to twist.
4) Apply a small amount of silicone lube on your finger tip and
wipe it around the O-rings. Wipe off excess lubricant. The
o-ring surface should have shiny, wet appearance.
12
clean
O-ring
grooves
and
O-rings
before
Advertisement
Table of Contents
