Advertisement
Quick Links
Use Manual FOR AHD LPR Camera
Product Introduction
Thank you for using the AHD LPR Camera, which plate machine low light Sony CMOS,
newest ISP, high speed MCU, Support Four in one ：AHD CVI TVI CVBS. The day and
night can clearly capture the front and rear of the vehicle speed 120KM / h below grade.
Built-in 1.8-inch LCD screen, Support both English and Chinese,
1.
Technical specification
Model
Image Sensor
Max. White LEDs Length
Day/Night
Focal Length
video
Special function control board
Power Supply
Power Consumption
Working Environment
Ingress Protection
Dimensions
Weight
statement:
1.The contents of the manual may be described with a certain product that you are now using
subtle differences , a problem cannot be solved if you use this manual, please contact our
technical support department or product vendor.
2.This manual will be updated from time to time, the company has the right without prior
notice
.
CA-CAR25AHD/ 4
1/2.8" 2Megapixel progressive scan Sony Sensor
6pcs white LEDS array/30m
Full Color
25mm
Four in one: AHD CVI TVI CVBS
Function control panel（With six buttons ）
Speed/ Ambient brightness/ White light lamp/ WDR four modes/ HLC four files
can be adjusted
DC12V/2a
<11.5W (with IR on, motorized lens working)
-30°C~+60°C, Less than 95% RH
IP66
370mm × 145mm× 115mm
2.5kg
Advertisement
Related Manuals for CADDX CA-CAR25AHD/4
Summary of Contents for CADDX CA-CAR25AHD/4
- Page 1 Use Manual FOR AHD LPR Camera Product Introduction Thank you for using the AHD LPR Camera, which plate machine low light Sony CMOS, newest ISP, high speed MCU, Support Four in one ：AHD CVI TVI CVBS. The day and night can clearly capture the front and rear of the vehicle speed 120KM / h below grade. Built-in 1.8-inch LCD screen, Support both English and Chinese, Technical specification Model...
-
Page 2: Internal Structure
2: Internal structure 3.Installation guide 3.1:Installation of parking lots and roads, please refer to the following illustration 3.2:The camera should be installed as the front body is tilted downwards, and the rear part is upward, so as to effectively avoid zhe car's lights to reach the CDS which is at the end of the camera, Otherwise, once the CDS effected by improper lights, it will lead zhe camera's LEDs switch on and off continuously... -
Page 3: Adjustment Guide
4 Adjustment guide 4.1 Turn the camera tail buckle counterclockwise and open the camera cover. Before you operate, read the camera's internal instructions panel carefully. speed setting effect diagrams is as follows, please refer to Low speed setting Right speed setting 4.3environment Brightness setting effect chart as follows, please refer to Too high ambient brightness settings Right ambient brightness settings... - Page 4 4.4:lights results refer to the brightness setting. Is shown below Light brightness is too bright Right Light brightness 4.5brightness setting renderings below, please refer to WDR effect mode is set to a low Wide dynamic setting to Medium mode effect Strong light suppression setting effect chart is as follows, please refer to Strong light suppression is not turned Right strong light suppression...
- Page 5 4.7 Default Parameters Mode: Parking Speed: 30KM/h Scene bri: medium LED Light: Level HSBLC: low WDR: medium 4.8 Four in one mode switching Press the menu button vertically, enter the OSD menu, select the second”exposure“, press the right-click button three times in a row, And then enter the ”exposure“...