Axent .ONE Cleaning And Care page 3

R EM OTE CO NTRO L
C LE AN I N G R ECO M M EN DATIO N
Cleaning interval
Regularly
Weekly/monthly
Quarterly
AXENT International AG
info@axentbath.ch
www.axentbath.ch
C LE AN I N G TH E R EM OTE CO NTRO L
Wipe the remote control with a soft cloth (cotton, not microfibre).
R EPL AC I N G TH E BAT TER I ES O F TH E R EM OTE CO NTRO L
If the AXENT logo is flashing, the batteries need to be changed soon.
The remote control requires three 1.5 V LR3 / AAA batteries.
1. Open the cover on the back of the remote control.
2. Take out the empty batteries and insert new ones. Ensure they are the right way round.
Cleaning steps
– Wipe off drops of water with a soft, dry cloth (cotton, not microfibre).
– Remove the toilet seat and lid and clean them separately.
– Clean the hinges and bolts of the toilet seat and lid with a damp cloth, then dry.
– Wipe all surfaces and corners thoroughly with a soft, damp cloth (cotton, not microfibre)
and a gentle liquid detergent.
– Inspect the spray arm for signs of scale.
– Run the descaling programme.
Every 4 months, the night light flashes red to let you know that all parts in contact with water
need to be descaled.
Once you have run the descaling programme, the night light resets itself to the previously set
mode.