Replacing Sliding Hinge; Removing Sliding Hinge - Bosch KIN85NSF0G Repair Hints

Repair

4.3 Replacing sliding hinge

Required tools:
Torx Bit TX20 6,3 mm (1/4")
Warning
Heavy, bulky appliances!
Back and muscle injuries
▶ Appliance door removal operation should only be carried out by
trained specialists.
▶ To move the appliance, two people are required.
▶ Use only suitable tools and equipment.
Caution
Sharp edges!
Cut injuries
▶ Wear protective gloves.
Caution
Risk of falling parts due to released screws!
Injury because of falling parts.
▶ Secure component from falling down.
Notice
Risk of falling parts due to released screws!
Damage to other parts of the appliance or at customers home e.g. bot-
tom.
▶ Secure component from falling down.
Prerequisite:
Appliance is disconnected from power supply.
Furniture door and appliance door are separated. See Installation Instruction.
2021-03-10_9001628069

4.3.1 Removing sliding hinge

1. 1. Unscrew two screws (1).
2. Remove upper door upper hinge (2).
[00340865]
3. Remove upper door (3).
4. Unscrew two screws (4).
5. Remove lower door upper hinge (5).
6. Remove lower door (6).
Copyright by BSH Hausgeräte GmbH Page 108 of 457