Playback; Playing Back The Video - Canon DC DC210 Instruction Manual

Playback

32
NOTES
When you wake up the camcorder from
standby mode, the following settings will be
changed automatically:
- Manual focus returns to automatic focus (AF).
- Manual exposure adjustment returns to
automatic exposure.
- Zoom position returns to full wide angle W.
In standby mode, the camcorder consumes
only half the power used in record pause mode.
Using this mode you can save energy when
using a battery pack.
The camcorder will shut off if left in the Quick-
Start ready mode for 10 minutes, regardless of
the [POWER SAVE] setting (
select the length of time until shut-off with the
[ STANDBY OFF] setting (
To restore the power if the camcorder shut off,
slide the power switch toward MODE and
release it, or move the power switch to
back to ON again.
If you perform any of the following actions
while in standby mode (while the standby lamp
is on), the camcorder will return to record pause
mode.
- Open the disc compartment cover.
- Slide the power switch toward MODE.
- Change the position of the
Playback
Playback

Playing Back the Video

41). You can
41).
and
1
Move the power switch to ON, then
slide it down toward MODE and
release it to set the camcorder in
PLAY mode.
2
Move the
(Movies) position.
/ switch.
3
Move (
to the scene you want to play back.
4
Press
D
URING
5
Press
playback.
6
Press
return to the scene index screen.
During the playback of a DVD-R DL (dual-
layered) disc, you might notice a brief stop
The green PLAY indicator will turn on.
/ switch to the
The scene index screen appears with
the selection frame on the first scene.
, ) the selection frame
Press or on the camcorder to
move to the next/previous index page.
to begin the playback.
/
The playback will start from the scene
selected and continue until the end of
the last scene recorded.
P
LAYBACK
again to pause the
/
to stop the playback and
NOTES
( 12)