Samsung HG50AT690U Install Manual page 40

Hotel Option menu Item
REACH RF Mode
REACH IP Mode
Server URL Setting
REACH Channel
Group ID
REACH
Solution
REACH Update Time
REACH Update Immediate
REACH Config Version
Description
Turn on or off the REACH RF Mode. When set to on, the TV can operate with the
REACH Server (Modulator) through the RF cable.
You can turn on or off the REACH IP Mode. When set to on, the TV can operate with
the REACH IP Server through the IP network.
You can enter the address of REACH IP Server. (Example: http://192.168.1.2:443)
This is a DTV cable channel PTC number for receiving REACH data when the REACH
RF Mode set to on. The value must be same as the value set on the REACH Server
(Modulator).
You can set the TV's group ID to manage TVs in groups on the REACH Server
(Modulator).
You can set the specific time to receive and update REACH data from the REACH
Server (Modulator). (Operates when the AC power cord is plugged in and the power
is off.)
• OFF: You can turn off the REACH Update Time function.
• 12:00 am: 12:00 am everyday
• 2:00 am: 2:00 am everyday
• 12:00 pm: 12:00 pm everyday
• 2:00 pm: 2:00 pm everyday
When set to on, the TV will receive and update REACH data from the REACH Server
(Modulator) right after the power is off. (Operates when the AC power cord is plugged
in and the power is off.)
Displays the TV configuration data version received from the REACH Server.
English - 40