Changing The Settings - JVC Everio R GZ-RX605 Detailed User Manual

Changing the Settings

To use the Wi-Fi function, it may be necessary to perform some settings on the camera and smartphone.
Menu Settings
Setting
Wi-Fi SETTING
To register an access point manually, it is necessary to perform the QR code setting.
o
"Registering Access Point Manually" (A p. 143)
Configures various settings related to the network.
SET FROM QR CODE
0
Perform the Wi-Fi setting after the camera reads the QR code generated by following the instruction in
Detailed User Guide.
"Using Wi-Fi by Creating a QR Code" (A p. 132)
ACCESS POINTS
0
Adds or deletes an access point (wireless LAN router).
"Registering Access Point Using Wi-Fi Protected Setup (WPS)" (A p. 110)
"Registering Access Point Using WPS PIN" (A p. 111)
MAC ADDRESS (Media Access Control address)
0
Displays the MAC address of the camera.
(The above shows the MAC address when connected to an access point, while the below shows the
address during direct connection.)
"Checking the MAC Address of this Camera" (A p. 112)
Wi-Fi WITH LCD CLOSED
0
This unit does not turn off while it is connected to Wi-Fi even when the LCD monitor is closed.
"Configuring Wi-Fi Connection with LCD Monitor Closed" (A p. 112)
INITIALIZATION
0
Returns the network settings to their default values.
"Initializing the Wi-Fi Settings" (A p. 113)
Details
Using Wi-Fi
109