Advertisement
Quick Links
P-70
Congratulations on the purchase of your new Magnaflux
P-70 Magnetic Particle Inspection Machine! This guide will
help you install and set-up your new Magnaflux machine.
If you have any questions, please contact your local
Magnaflux Authorized Service Center or call Magnaflux
Customer Service at 847-657-5300.
P-70
Page 1
Magnaflux-SRVC-IG019
© 2019 Magnaflux
Issued: Mar 2019
Rev. 3
Advertisement
Summary of Contents for Magnaflux P-70
- Page 1 P-70 Congratulations on the purchase of your new Magnaflux P-70 Magnetic Particle Inspection Machine! This guide will help you install and set-up your new Magnaflux machine. If you have any questions, please contact your local Magnaflux Authorized Service Center or call Magnaflux Customer Service at 847-657-5300.
- Page 2 One end of the cable will be connected to the “Common” and the other end will be connected to either “HWDC” or “AC”. 2. The power supply amperage and voltage must be as stated (or better) on the P-70 name- plate.