Table of Contents
Advertisement
Precautions when laying power
and ground wiring
Use round pressure terminals for connections
to the power terminal block.
When laying ground wiring, you must use
round pressure terminals.
Round pressure terminal
When none are available, follow the instructions
below.
- Do not connect wiring of different thicknesses
to the power terminal block. (Slack in the power
wiring may cause abnormal heat.)
- When connecting wiring which is the same
thickness, do as shown in the figure below.
- For wiring, use the designated power wire
and connect firmly, then secure to prevent
outside pressure being exerted on the
terminal block.
- Use an appropriate screwdriver for tightening
the terminal screws. A screwdriver with a
small head will strip the head and make
proper tightening impossible.
- Over-tightening the terminal screws may
break them.
Power wire
(Ground wire)
WIRING CONNECTION
9
Hide quick links:
Advertisement
Table of Contents
